中化建國際招標有限責任公司受招標人委托對下列產品及服務進行國際公開競爭性招標，于2025-08-15在中國國際招標網公告。本次招標采用電子招標方式，現邀請合格投標人參加投標。
 

　　1、招標條件
 

　　項目概況:138套熔體壓力變送器
 

　　資金到位或資金來源落實情況:已落實
 

　　項目已具備招標條件的說明:已具備
 

　　2、招標內容
 

　　招標項目編號:0704-2540JDCP0022
 

　　招標項目名稱:中海殼牌惠州聚碳酸脂項目138套熔體壓力變送器
 

　　項目實施地點:中國廣東省
 

　　招標產品列表(主要設備):

序號	產品名稱	數量	簡要技術規格	備注
1	熔體壓力變送器	138套	詳見招標文件	無

　　3、投標人資格要求
 

　　投標人應具備的資格或業績:資格要求
 

　　Requirements for Qualification of Bidder
 

　　A.如果投標人為境內注冊公司，投標人需提供合法有效的企業法人營業執照、稅務登記證及組織機構代碼證或證照合一的營業執照，投標時需提供原件掃描件(原件備查)；
 

　　如果投標人為境外注冊公司，需提供有效的公司登記注冊證明；
 

　　A.The bidder within the customs territory shall provide valid independent legal person business license, tax registration certificate, organization code certificate, or combined certificate and business license. The scanned copy of the original shall be provided during bidding (the original copy for reference);
 

　　The bidder outside the customs territory shall provide valid certificate to prove valid business registration certificate.
 

　　B. 投標人應為本次投標所投產品的制造商；如投標人為制造商同一集團負責銷售投標所投產品的全資子公司、控股子公司(投標人應提供制造商或其上級公司證明上述事項的證明文件)，則視投標人為制造商。？投標產品由制造商不同工廠生產且使用相同品牌時，予以接受。
 

　　The bidder shall be the manufacturer of the bidding products.If the bidder is a wholly-owned subsidiary or holding subsidiary of the same group as the manufacturer responsible for sales of the bidding products, the bidder shall provide relevant evidence documents from the manufacturer or its superior company to prove the above matters, and in such case the bidder shall be deemed as the manufacturer. The bidding product produced by different factories of the manufacturer with the same brand shall be accepted.
 

　　C. 是否接受聯合體投標：否
 

　　C. Joint Venture: Not Accepted
 

　　D. 未領購招標文件是否可以參加投標:不可以
 

　　E. Bid without the bidding documents：NOT Allowed
 

　　(2)資質要求Qualification Requirement
 

　　A.投標產品制造商提供的熔體壓力變送器及接線盒須符合相應的防爆標準，并取得防爆檢驗機構的相應防爆等級的《防爆合格證》，防爆等級為Ex db ⅡC T4 Gb/Ex ia ⅡC T4 Ga，《防爆合格證》應由NEPSI、CQST、PCEC、IECEx、ATEX之一或國家認可的其他防爆認證機構出具。
 

　　A.The melt pressure transmitters and junction boxes provided by the bidder manufacturer must comply with applicable explosion-proof standards and obtain the Explosion-Proof Certification? corresponding to the specified protection level. The certification must cover the explosion-proof rating of Ex db IIC T4 Gb/Ex ia IIC T4 Ga and be issued by one of the following entities: NEPSI, CQST, PCEC, IECEx, ATEX?, or other nationally recognized explosion-proof certification bodies..
 

　　B.投標人提供的熔體壓力變送器及其附件必須均取得相應的國家權威機構的功能安全認證，等級不應低于SIL2。SIL證書應由TUV、Exida、BV、北京儀綜所(ITEI)和上海自動化所(SITIIAS)之一的認證機構出具。
 

　　B.The bidder-provided melt pressure transmitters and accessories must all obtain corresponding functional safety certification from nationally authoritative institutions, with a certification level no lower than SIL2. The SIL certificates shall be issued by one of the following certification bodies: TüV, Exida, BV, Beijing Institute of Instrumentation (ITEI), or Shanghai Automation Instrumentation Institute (SITIIAS).
 

　　(3)業績要求Requirement for Bidder's reference:
 

　　2015年1月1日至投標截至日(以合同簽署時間為準)，投標產品制造商在中國境內有至少1個合同的應用于聚碳酸酯裝置的熔融體壓力變送器供貨業績，且單個合同供貨數量不少于30臺。
 

　　同一集團全球范圍內不同制造商(即同一集團旗下的全資子公司或控股子公司或制造工廠)制造的所投產品的業績，視為投標人所投產品的制造商的業績；投標人應提供說明函，說明本次所投產品的制造商與滿足上述業績要求的產品制造商屬于同一集團。
 

　　From January 1st, 2015 to the deadline for submission of the bid (subject to the signing time of the contract), the manufacturer of the bid Melt Pressure Transmitter shall have at least one supply contracts performance of Melt Pressure Transmitter for PC Unit within P.R.China, and a single contract involved supplying no fewer than 30 Melt Pressure Transmitters.
 

　　The performance of the products submitted by different manufacturers within the same group (i.e., wholly-owned subsidiaries, holding subsidiaries or manufacturing plants under the same group) is regarded as the performance of the manufacturer of the products submitted by the bidder; the bidder should provide an explanatory letter to state that the manufacturer of the products submitted in this bid and the manufacturer of the products meeting the above performance requirements belong to the same group.
 

　　投標人須按規定格式提交業績表，并提交相關業績證明文件。業績證明文件包括：1)銷售合同和2)用戶簽字或蓋章的到貨驗收材料(到貨驗收單或調試驗收?qǐng)?bào)告或其他可以證明合同項下貨物已經到貨驗收的有效證明材料)。投標人所提交的業績證明文件必須至少體現以下內容：合同簽署時間、合同簽署頁(國內貿易合同應有雙方蓋章，國際貿易合同應有雙方簽字或蓋章)、制造商名稱、裝置名稱、貨物名稱、供貨數量。
 

　　若業績合同為年度協議，除提供年度協議外，還應提供相應的已到貨訂單，訂單內容或編號應與年度協議相關聯。同一個年度協議下提供1個或以上的訂單及與訂單對應的到貨驗收材料均算為1個有效業績。
 

　　The bidder shall submit the performance record form in the prescribed format along with relevant supporting documents, which must include:sales contracts and delivery acceptance materials signed or sealed by the end-user (such as delivery acceptance forms, commissioning acceptance reports, or other valid documentation proving goods acceptance under the contract);all submitted proof documents must contain at minimum:the contract signing date, executed signature pages (with both parties' official seals for domestic contracts, or signatures/seals for international contracts), manufacturer's name, plant/installation name, description of supplied goods, and supplied quantity.
 

　　If the performance contract is an annual agreement, in addition to providing the annual agreement, corresponding received orders should also be provided, and the order content or number should be associated with the annual agreement. Providing one or more orders and corresponding acceptance evidence under the same annual agreement is considered as one valid performance.
 

　　未提交業績證明文件，或通過所提供的業績證明文件無法認定滿足上述業績要求的，均視為無效業績。
 

　　If no documentary evidence furnished, or documentary evidence furnished can not demonstrate the above performance requirements, the relevant reference will be deemed invalid.
 

　　是否接受聯合體投標:不接受
 

　　未領購招標文件是否可以參加投標:不可以
 

　　4、招標文件的獲取
 

　　招標文件領購開始時間:2025-08-15
 

　　招標文件領購結束時間:2025-08-22
 

　　是否在線售賣標書:否
 

　　獲取招標文件方式:現場領購
 

　　招標文件領購地點：中國海油采辦業務管理與交易系統(https://buy.cnooc.com.cn)
 

　　招標文件售價:￥200/$30
 

　　其他說明:投標人獲取招標文件后需登錄機電產品招標投標交易平臺辦理CA鎖CA鎖便于用來線上投標時使用，咨詢?nèi)鞒滩僮麟娫挘?000606000-1。
 

　　After obtaining the bidding documents, the bidder shall log on the trading platform of bidding and tendering for mechanical and electrical products to handle the CA lock, which is convenient for online bidding.For consultation, the whole process can be operated by 4000606000-1.
 

　　5、投標文件的遞交
 

　　投標截止時間(開標時間):2025-09-05 09:00
 

　　投標文件送達地點:必聯網http://www.ebnew.com或機電產品招標投標電子交易平臺(http://www.chinabidding.com)
 

　　開標地點:必聯網http://www.ebnew.com或機電產品招標投標電子交易平臺(http://www.chinabidding.com)
 

　　6、聯系方式
 

　　招標人:中海殼牌石油化工有限公司
 

　　地址:廣東省惠州市大亞灣石油化學工業區
 

　　聯系人:黃曉潔
 

　　聯系方式:+86-0752 3681236
 

　　招標代理機構:中化建國際招標有限責任公司
 

　　地址:北京市東城區東直門外小街6號海油大廈4層
 

　　聯系人:王嘉榮