QQ交談
您所在位置：產品搜索
請輸入產品關鍵字：
聯系方式
地址：上海市北京東路668號科技京城東樓27樓C1室
郵編：200001
聯系人：程東旭
電話：
傳真：
手機：19121166298
留言：發送留言
個性化：www.dlshyz.com
網址：
商鋪：http://www.mcstair.com/st152775/
郵編：200001
聯系人：程東旭
電話：
傳真：
手機：19121166298
留言：發送留言
個性化：www.dlshyz.com
網址：
商鋪：http://www.mcstair.com/st152775/
公司動態
BALLUFF視覺傳感器BVS0019
點擊次數：1108 發布時間：2017-5-3
概覽
組件
視覺傳感器應用示例
插接器與連接導線 視覺傳感器 照明燈，附件
巴魯夫視覺傳感器主要用于 進行可靠的缺陷及質量檢查。其多樣性 不僅衍化出多種用以對生產過程進行 *監測，同時每種型號均以自身*的 屬性*。此外，這款多面手操作起來 也非常簡單。
您可以*根據您的需求選擇合適的視覺傳感器型號， 從而在各種情況下都能獲得*的解決方案。
優勢
實現、經濟的檢測過程
由于安裝及配置十分迅速， 因此準備時間較短
只需3步就能輕松便捷地完成設置
視覺傳感器 - 貼合您的要求
Keyfeatures
| Version | BVS-E Identification |
|---|---|
| Lens | Focal distance 8.0 mm |
| Interface | Ethernet 10/100 Base T, RS232 (9.6…115.2 kBaud) |
| Light type | LED, infrared |
| Field of view max. | 480 x 360 mm |
| Field of view min. | 24 x 18 mm |
| Working range | 50…1000 mm |
General attributes
| Basic standard | EN 62471:2008, IEC 60947-5-2 |
|---|---|
| Short-circuit protected | yes |
| Protected against polarity reversal | yes |
| Additional text | Use of external illumination recommended for working distances greater than 300 mm . Detection rate is dependent on the evaluation function. Only for NFPA 79 applications (machines with a supply voltage of maximum 600 volts). Appropriate connectors can be obtained from Balluff. When not in use, protect interface plug from penetration by dust and liquids. Protective cap is included in the scope of delivery. For additional information, refer to user's guide. Order accessories separay. Do not press key using a pointed tool. |
| Series | Series ID |
| Indicator | Output 1 active - LED OG Output 2 active - LED OG Power - LED GN Connection with PC - LED GN |
| Duration of time function | Impulse 1…1000 ms or infinite, Delay 0…1000 ms |
| Input function | Trigger |
| Setting | Image sharpness Teach-in reference image |
| Adjuster | Adjusting ring (1x), Key (1x) |
| Number of inspections max. | 20 |
| No. of charac. per inspec. max. | 255 |
| Enclosure Type per IEC 60529 | IP54 |
| Approvals | CE, cULus |
Electrical attributes
| Connection type | Connector |
|---|---|
| Rated operating voltage Ue DC | 24,0 V |
| Effective operating current Ie | 100 mA |
| Ripple max. (% of Ue) | 10 |
| Interface | Ethernet 10/100 Base T, RS232 (9.6…115.2 kBaud) |
| Switching output | PNP (2x) |
| Switching function | NO |
| Operating voltage UB min. DC | 22 V |
| Operating voltage UB max. DC | 26 V |
| No-load current max. Io at Ue | 200 mA |
| Voltage drop Ud max. (at Ie) | 1,8 V |
| Supplementary output | Trigger output PNP |
Mechanical attributes
| Connector type | M 12x1, 4 pole, A-coded, M12x1, 4 pole, D-coded |
|---|---|
| Oberflächenschutz | painted |
| Ambient temperature Ta min. | -10 °C |
| Ambient temperature Ta max. | 55 °C |
| Sensing surface material | PMMA |
| Housing material | GD-AL, ABS |
| Mounting type | Screw M4 |
| Design | Block, 90° connection |
| Working range | 50…1000 mm |
| Far working distance Wh | 1000 mm |
| Near working distance Wl | 50 mm |
Optical attributes
| Principle of optical operation | CMOS image sensor black-white |
|---|---|
| Light type | LED, infrared |
| Wavelength | 870 nm |
| Optical special feature | Incid. light, can be disabled Infrared pass filter |
| LED group per IEC 62471 | Exempt group |
| Image resolution max. | VGA 640 x 480 Pixel |
| Detection rate typ. | 3…40 Hz |
| Lens | Focal distance 8.0 mm |
| Field of view max. | 480 x 360 mm |
| Field of view min. | 24 x 18 mm |