您好, 歡迎來到化工儀器網
| 產地類別 | 國產 | 價格區間 | 面議 |
|---|---|---|---|
| 儀器種類 | 管式爐 | 應用領域 | 醫療衛生,環保,食品/農產品,化工 |
產品簡介
詳細介紹
前端預熱雙溫區滑軌爐 可實現快速升降溫主要特點Main features:
1) Can pull in the required high tem. to sample to get a rapid heating rate; also pull out the high tem. furnace and let the sample in the room tem. Environment to get a rapid cooling rate.
操作時可將實驗需要的恒定高溫直接推到樣品處，使樣品能得到一個快速的升溫速度，同樣也可將高溫的管式爐直接推離樣品處，使樣品直接暴露在室溫環境下，得到快速的降溫速率。
2) Used for graphene growing or CVD experiment with RTP requirement
應用于有快速升溫需要的石墨烯生長或CVD實驗。
前端預熱雙溫區滑軌爐 可實現快速升降溫技術參數Technical Parameters
Power 輸入電源 | Power rated: 3KW 額定功率：3KW | ||||
Voltage 電壓 | Voltage rated: AC208-240V 50/60HZ 額定電壓： AC208-240V 50/60HZ | ||||
Working Temperature 工作溫度 | Max. Temperature: 1200℃( 1 hr) 最高溫度：1200℃ (1小時) Continuous working temperature: ≤1100℃ 持續工作溫度：≤1100℃ Max. Heating/colling Rate: ≤20℃/S 升溫速率：≤20℃/秒 | ||||
控溫方式 | PID automatic control and auto-tune function. 模糊PID控制和自整定調節 30 programmable segments for precise thermal processing. 智能化30段可編程控制 Built-in protection for the over-heated and broken thermocouple. 超溫和斷偶報警功能 | ||||
Length of heating zone 加熱區長度 | 200+200mm | ||||
Length of constant zone 恒溫區長度 | 100+100mm | ||||
Heating Elements 加熱元件 | Resistance wire, Fe-Cr-Al Alloy doped by Mo 電阻絲（摻鉬鐵鉻鋁合金） | ||||
Temperature Accuracy 控溫精度 | +/- 1℃ | ||||
Processing tube 爐管 | Φ50/60/80/100*1400mm(optional) Φ50/60/80/100*1400mm(管徑可選) Two tube blocks are included for blocking heat radiation generated from tube center.,must be fully inserted into the furnace chamber before heating(quartz or ceramic optional). 兩個氧化鋁管堵阻擋管中心產生的熱輻射，管堵必須在加熱前塞進爐膛的正確位置(石英或氧化鋁管堵可選)
| ||||
Dimensions 尺寸 | Furnace size :1500*380*620mm(L*W*H without tube & flange) 爐子尺寸：1500*380*620mm(長*寬*高 不含爐管和法蘭) | ||||
Net Weight 凈重 | 130kg | ||||
真空法蘭 | KF25 quick clamp flange 兩端為KF25快速卡箍法蘭
| ||||
Vacuum Pressure 真空壓力 | 1pa can be achieved by mechanical pump 機械泵可達1pa 10^-4 pa can be reached by molecular pump 分子泵可達10^-4pa Please click the picture below to order vacuum parts 點擊下列圖片訂購真空部件
| ||||
Warranty 質保 | One year limited warranty with lifetime support (Such consumable parts as tube, quartz block, and O-rings, etc. are NOT supported by the warranty) 一年質保終身支持（消耗品如爐管，石英管堵，O型圈等不在質保范圍內） | ||||
Warning 注意事項 | Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence and the cracks may be repaired with alumina coating. 在使用過程中爐膛表面可能出現細小裂紋。這是正常情況，裂紋可以用氧化鋁涂層修復。 | ||||
Compliance 認證 | CE Certified CE認證 The furnace is ready to pass TUV (UL61010) or CSA certification at extra cost. 付費可進行TUV(UL61010)或CSA認證 | ||||
Operation instructions 操作指導 | Click to download the operating manual 點擊下載說明書
|
其他推薦產品
更多產品-
面議
-
面議
-
面議