您好, 歡迎來到化工儀器網
| 產地類別 | 進口 |
|---|
?Detects leaks that other instruments can’t
?1ppm Minimum Detectable Level for refrigerants – the lowest MDL in the industry
產品簡介
詳細介紹
銷售：鐘
Single-Zone
High Precision Refrigerant Leak Detector
- Detects leaks that other instruments can’t
- 1ppm Minimum Detectable Level for refrigerants – the lowest MDL in the industry
- High-performance detection of halogenated refrigerants, CO2 and NH3
- Identify leaks early to mitigate refrigerant loss, enhance energy efficiency
- Ideal solution for chiller room and machinery room monitoring
- Over 50 different refrigerants accuray detected
- Proprietary infrared (NDIR) sensor technology delivers precision and stability
- No calibration required, minimal maintenance
Bacharach's Single-Zone delivers the best refrigerant leak detection available, with industry-leading MDL of 1ppm for halogenated gases, the fastest sampling frequency and the widest range of refrigerants accuray detected. The Single-Zone is the ideal tool for early detection of leaks from specific target areas such as chiller rooms and mechanical rooms. The low MDL enables detection of leaks that other instruments can't find, enhances effective refrigerant management and delivers cost savings through reduced refrigerant recharge and enhanced energy efficiency. A variety of communication interfaces are available, including Modbus, BACnet and LonWorks, allowing easy integration into MBS/BAS systems and remote monitoring solutions.
Type | Single point sampling system using proprietary IR sensor | |
Gases | Refrigerants: | CFCs, HFCs, HCFCs, HFOs |
Natural Refrigerants: | Ammonia, Carbon Dioxide | |
Measuring Range | Refrigerants 0 to 10,000 ppm | |
Sensitivity | Refrigerants 1 ppm | |
Sampling Distance | 0 to 500 ft (0 to 150 m) | |
Display | Backlit graphic LCD, three status LEDs | |
Output | 4 to 20 mA | |
Power Supply | 100 to 240 VAC, 50 / 60 Hz | |
Relays | 3 alarm relays, 1 fault relay, SPDT | |
Rating 3 A @ 250 VAC, resistive load | ||
Ambient Conditions | Temperature | 32 to +122 °F (0 to +50 °C) |
Humidity | 5 to 90 %RH, non condensing | |
Altitude | 0 to 6,560 ft (2,000 m) | |
Enclosure | Powder-coated aluminum housing | |
Size (w x h x d) | Approx. 13.7” x 7.7” x 3.6” (350 x 195 x 95 mm) | |
Weight | Approx. 7 lbs. (3.2 kg) | |
Approvals | CE, UL, CSA, EN 61010-1, EN 14624 | |