您好, 歡迎來到化工儀器網
| 產地類別 | 進口 |
|---|
產品簡介
詳細介紹
銷售：鐘
10KV絕緣耐壓校準儀、10KV絕緣耐壓校準儀、
Insulation Tester Calibrator is based on 1 T? programmable high resistance decade with 10 kV DC compliance, coupled with test voltage meter. This setup allows for calibration of UUT's test voltage, short current verification, timer function verification and calibration of dielectric parameters measurement including polarization index (PI), dielectric absorption ratio (DAR) and polarization ratio (PR).
Versions & Options:
| base version with RS232 & GPIB | |
| All Meatest instruments are available with 3, 4 and 5-year extended warranties. Delivered with EU plug. Can be swapped for other types on demand. | |
Accessories
| option 10 | Test cable 1000V/20A, 1m, black |
| option 191-11 | Test cable 5000V/20A, 1m, red |
| option 191-12 | Grounding cable, 1m, green |
| GPIB cable | IEEE488-IEEE488 cable, 2m |
| RS232 adapter | RS232-USB generic adapter |
| RS232 cable | male-female RS232 cable, 2m |
Calibration domain
M191 is designed for thorough calibration of insulation testers, megaohmmeters, HIPOT testers or any other DC high resistance meters and safety testers with test voltage up to 10 kV. With M191's pallete of functions you'll no longer need multiple instruments and complex setups for high voltage calibrations.
RS-232 and GPIB interface allow for remote control of the calibrator and time saving automated calibrations using SW package CALIBER/WinQbase.
| DC resistance | 10 k? - 1 T?, 10.5 kV max. ± 0.1% / year |
| DC capacitance | 10 nF, 50nF, 100 nF, 5.25 kV max. ± 0.5% / year |
Test Signal Meter
| DC voltage | 50 V - 10.5 kV ± 0.5% / year |
| DC current | 0 - 5 mA ± 0.2% / year |