702-889.083

德國耶拿EA3100爐子

用于德國耶拿EA3100硫氮分析儀器的檢測器部分，屬于定期更換的光學主件。

analytikjena

Consumables multi EA 5000

effective from 01.01.2010

  Priority Order number Description

Consumables general

402-889.527 Auto-Protection valve assembly, complete

no picture

available

德國耶拿EA3100爐子

  B 402-889.091 Lids for sample vials, 2 ml, set of 500 pieces

402-889.652 Flow test kit

no picture

available

A 402-889.182 Wires for cleaning syringe needles, set of 10 pieces

402-007.513 FAST connector, 1 piece

(adaptor angeled for gas tubings, black)

402-801.317 Fuse for furnace unit

T 10 A H, 20 mm

  402-820.044 Air filter for membrane dryer pump (at rear side of multi EA 5000), 1 piece

402-889.510 Multi purpose combustion tube

B 402-825.045 Tweezers, straight, truncated

B 402-889.092 Sample vials, 2 ml, set of 100 pieces

(for sample rack with 112 positions)

402-889.558 PTFE filter plate, d = 25 mm  (Auto protection replaent

filter)

Set of 5 pieces

402-820.129 Oxygen and argon gas supply tubing

FEP, OD 6 mm (sold by meter), 1 m

A 402-889.306 Screw cap with hole, GL 18

402-889.557 Sealing disk, 17 mm, for plastic cap GL 18, Set of 5 pieces

402-889.583 Special sealing 12 mm

(FAST connector at outlet of multi purpose combustion tube)

402-822.118 Heat resistent gloves, 1 pair

Sampling modules

MMS 5000

402-812.374 Replaent screw

(mounting of autosampler on the basic unit/ ABD)

A 402-823.079 Removable needles for 50 and 100 μl syringes, set of 3 pieces

402-886.248 Waste hose

A 402-889.206 Septum for rinsing vessel

402-889.533 Syringe 50 μl, with removable needle, without markings

  402-889.534 Syringe 100 μl, with removable needle, without markings   402-889.547 Gripper for sample boats

Autoinjector

402-889.589 Syringe 10 μl, for Autoinjector, with removable needle

recommended for higher element concentrations and systems with carbon module

402-889.592 Syringe 100 μl, for Autoinjector, with removable needle

402-889.590 Syringe 20 μl, for Autoinjector, with removable needle

recommeded for higher element concentrations, for systems with carbon module and for systems with only one detector module (N or S)

402-889.591 Syringe 40 μl, for Autoinjector, with removable needle

recommended as standard syringe for N/S systems

A 402-889.186 Removable special needles, set of 3 pieces

Manual Boat Drive - MBD

no picture

available

402-815.839 Sealing for sample port MBD

402-889.671 Feed  tube for MBD

402-889.672 Hook for MBD

402-889.670 MBD coupling tube, glass

402-889.674 Quartz boat, 40 mm x 9 mm, set of 10 pieces

  402-889.560 Set of sealing elements horizontal 402-889.673 Sample boat, special, with downholder for special applications

(e. g. AOX by batch method, EC/OC determination), 10 pieces

Automatic boat drive - ABD

402-889.551 ABD coupling tube, glass

402-886.236 Sealing for sample port ABD

A 402-881.028 Finger-Tight-Set, 1/8" for tubing, 5 ferrules and 5 screwing

A 402-889.073 Feed tube, for MVS shunt/ABD

A 402-889.066 Hook, for MVS shunt/ABD

suitable from MVS serial number  509 046 and higher

402-815.838 O-ring 14 mm x 4 mm for ABD

402-889.674 Quartz boat, 40 mm x 9 mm, set of 10 pieces

402-889.560 Set of sealing elements horizontal

A 402-889.050 Septum; 12.5 mm; set of 5 pieces

  402-889.673 Sample boat, special, with downholder for special applications

(e. g. AOX by batch method, EC/OC determination), 10 pieces

A 402-889.039 Adsorption material, set of 3 pieces

Gas Sampling System - GSS

B 402-889.148 Replaent septum for gas sampling bag 10 l, 1 piece

402-820.057 Ferrule 1/16", 1 piece

multi EA 5000: Ferrule for special needle (PEEK), horizontal operation, 1 piece

402-820.123 Ferrule for injection needle, vertical operation, 1 piece

B 402-889.147 Gas sampling bag 10 l for GSS and GSS type C, 1 piece

A 402-889.180 Injection head for GSS, LPG and GSS/LPG, vertical operation, complete

A 402-823.056 Needle; 0.63 mm x 0.35 mm; for all types of syringes; set of 3 pieces

multi EA 5000: removeable injection needle for vertical operation

mode

no picture

available

  402-889.423 Septum perforated for special needle PEEK in horizontal operation mode

A 402-890.018 Special needle for GSS,LPG and GSS/LPG, horizontal operation mode, PEEK

LPG Module and GSS/LPG combi module

402-889.439 Bubble vessel

402-820.057 Ferrule 1/16", 1 piece

multi EA 5000: Ferrule for special needle (PEEK), horizontal operation, 1 piece

402-820.123 Ferrule for injection needle, vertical operation, 1 piece

A 402-889.180 Injection head for GSS, LPG and GSS/LPG, vertical operation, complete

A 402-823.056 Needle; 0.63 mm x 0.35 mm; for all types of syringes; set of 3 pieces

multi EA 5000: removeable injection needle for vertical operation mode

A 402-815.058 Lab-type screw joint D 3.2 - GL 14, complete (red)

multi EA 5000: for bubble vessel

A 402-881.116 O-ring, i.d. = 6 mm x 3 mm

multi EA 5000: for screw cap GL 14 bubble vessel

no picture

available

  402-889.423 Septum perforated for special needle PEEK in horizontal operation mode

A 402-890.018 Special needle for GSS,LPG and GSS/LPG, horizontal operation mode, PEEK

Detection

Sulfur / nitrogen / carbon detection

no picture

available

402-889.061 Extended Sulfur Calibration Kit; 0,05 - 10 mg/l

no picture

available

  402-889.060 Extended Nitrogen Calibration Kit; 0,05 - 10 mg/l   B 402-889.070 Sulfur Calibration Kit (0.1 - 10 mg/l) incl. blank

  B 402-889.167 Sulfur Calibration Kit (10 - 100 mg/l) incl. blank

no picture

available

B 402-889.164 Sulfur Calibration Kit (100 - 500 mg/l)

B 402-889.069 Nitrogen Calibration Kit ( 0.1 - 10 mg/l) incl. blank

B 402-889.165 Nitrogen Calibration Kit (10 - 100 mg/l) incl. blank

B 402-889.162 Nitrogen Calibration Kit (100 - 500 mg/l)

A 402-823.048 Membrane dryer

B 402-815.030 O-ring 3.0 mm x 1.5 mm (3 mm x 6 mm) set of 10 pieces

multi EA 5000: sealing for inner part of membrane dryer

Sulfur Coulometer

A 402-889.313 Absorber tube for  Sulfur coulometer, glass

402-820.110 Connecting hose 1/8", (sold by meter), 1m

A 402-889.302 Diaphragma for titration cell of Sulfur coulometer

A 402-889.308 Sealing for screw cap with hole, GL 32, Sulfur coulometer

A 402-889.309 Sealing for screw cap with hole, GL 14, Sulfur coulometer

402-889.307 Sealing for screw cap with hole, GL 18, Sulfur coulometer

A 402-889.311 Gas introduction tube for titration cell of Sulfur coulometer, glass

A 402-520.137 Glass screw joint (gray)

multi EA 5000: (Screw joint for tube 8 mm)

A 402-889.301 Indicator electrode for titration cell of Sulfur coulometer

A 402-889.303 Cathode  for titration cell of Sulfur coulometer

A 402-889.310 Stirrer bar, titration cell, Sulfur coulometer

  402-884.015 Packet with one charge of silver wool

A 402-889.305 Screw cap with hole, GL 14 for gas introduction tube and electrodes,  Sulfur coulometer

A 402-889.306 Screw cap with hole, GL 18

A 402-889.304 Screw cap with hole, GL 32 Diaphragma,  Sulfur coulometer

A 402-889.314 Septa for titration cell for Sulfur Coulometer, set a 50 pieces

402-889.300 Titration cell for Sulfur coulometer, glass

A 402-889.312 Fitting GL zz, for absorber tube, sulfur coulometer

TC/TOC-Module

B 402-886.311 Syringe graduated 500 μl with removable needle for manual injection

B 402-885.019 Halogen absorber, complete with U-tube

  402-810.050 Halogen absorber filling (copper- and brass wool)

  A 402-885.017 High-temperature mat, set of 3 pieces

A 402-823.056 Needle; 0.63 mm x 0.35 mm; for all types of syringes; set of 3 pieces

multi EA 5000: removeable injection needle for vertical operation

mode

402-889.657 Condensation coil

no picture

available

  B 402-810.059 Special catalyst platinum, sufficient for 5 refills

A 402-810.048 Special catalyst platinum, one refill

B 402-886.318 Sample vials, 8 ml

50 mm x 18 mm, 125 pieces

A 402-884.005 Pump hose for peristaltic pump, waste

A 402-881.006 Quartz glass cullet, coarse grains, packet of 80 g

A 402-825.044 Quartz wool, 1 packet

402-889.659 Septum TIC vessel

no picture

available

402-889.658 Septum combustion tube

no picture

available

402-881.245 Set of TC prefilter and water trap

402-889.594 Syringe 250 μl with vent and removable needle

(for autosampler)

402-889.593 Syringe 500 μl with vent and removable needle

(for autosampler)

no picture

available

402-889.656 TIC vessel

A 402-825.150 U-tube, o.d. = 11 mm, without filling for halogenabsorber

(without connections)

no picture

available

402-889.655 Combustion tube

Chlorine Detection

402-815.831 Hose to connect suction extractor at workplace or vent

lengh 70 cm

402-889.549 Connecting part (metal) for  gas transfer line

with outside thread

402-825.123 Beaker for sulfuric acid vessel

402-889.561 Replaent hose for heated gas transfer line

402-820.053 Ferrule for connecting part (metal)

for gas transfer line with outside thread

402-820.055 Ferrule for screw joint

gas transfer line with inside thread

402-889.559 Gas transfer hose

no picture