您好, 歡迎來到化工儀器網
| 供貨周期 | 現貨 |
|---|
產品簡介
詳細介紹
基本型內環金屬纏繞墊有些密封件是安放在槽狀的填料函中，這時需要緊配安裝，施工時不可粗糙、野蠻，動作很大的強行裝入勢必破壞密封件原始預制結構，這就好比把預制混凝土打碎后填入所需部位必然導致災難一樣。對這類密封件安裝必須十分小心、仔細，嵌入須逐次分步進行
基本型內環金屬纏繞墊
下表是纏繞墊片直徑公差（即用于法蘭的名義管道直徑）：
| DIN (mm) | ANSI B16.5 BS1560 (mm) Mss sp-44 | API 605 | 公差 | |
| 內環內徑 墊片內徑 | <=600 | <=24" | >=26" and <=34" | ±0.5 |
| >600 and <=800 | >24" and <=34" | >=36" and <=60" | ±0.9 | |
| >800 and <=1600 | >34" and <=60" | ±1.3 | ||
| >1600 | >60" | ±1.6 | ||
| 墊片外徑 | <=600 | <=24" | <=24" | ±0.9 |
| >600 and <=16000 | >24" and <=60" | >24" and <=60" | ±1.8 | |
| 1600 | >60" | ±2.2 | ||
| 外環外徑 | >=1/2" and <=60" | ±0.9 | ||
| <=600 | <=24" | 0-1.0 | ||
| >600 and <=1000 | >24" and <=34" | 0-1.8 | ||
| >1000 and <=1600" | >34" and <=60 | 0-2.2 |