化工儀器網
技術文章
測量應用案例-20200310
閱讀：182 發布時間：2020-3-23文獻名： Continuous Multistage Synthesis and Functionalization of Sub-100 nm Silica Nanoparticles in 3D-Printed Continuous Stirred-Tank Reactor Cascades
作者： Ioannis Lignos, Hooisweng Ow, Jeniffer Perea Lopez, D’Ante McCollum, Haomiao Zhang, Joseph Imbrogno, Yi Shen, Sehoon Chang, Wei Wang, Klavs F. Jensen
Department of Chemical Engineering, Massachusetts Institute of Technology, 77 Massachusetts Avenue, Cambridge, Massachusetts 02139, United States
摘要：The controlled and continuous production of nanoparticles (NPs) with functionalized surfaces remains a technological challenge. We present a multistage synthetic platform, consisting of 3D-printed miniature continuous stirred-tank reactor (CSTR) cascades, for the continuous synthesis and functionalization of SiO2 NPs. The use of the CSTR platform provides ideal and rapid mixing of precursor solutions, precise injection of additional reagents for multistep reactions, and facile operation when using viscous solutions and handling of syntheses with longer reaction times. To exemplify the use of such custom-designed CSTR cascades, amine- and carbohydrate-functionalized SiO2 NPs are chosen as model reaction systems. In particular, the intensified flow reactor units allowed for the reproducible formation of SiO2 NPs with diameters less than 100 nm and narrow size distributions (3–8%). Most importantly, by assembling various 3D-printed CSTR cascades, we synthesized gluconolactone-capped polyethylenimine-modified silica NPs in a fully continuous manner. The inherent control over NP surface charge, reactor scalability, and the significant shortening of processing times (less than 10 min) compared to batch methodologies (several days) strongly indicate the ability of the reactor technology to accelerate continuous nanomanufacturing. In general, it provides a simple route for the reproducible preparation of functionalized NPs, thus expanding the gamut of flow reactors for material synthesis.