FPU2005蠕動泵 美國omega

可變速和定速蠕動泵
FPU2000, FPUVS2000, FPUDV2000
可變速和定速蠕動泵
Peristaltic Pump Tube Does Not Require Valves 
Self Priming 
High Outlet Pressure Capability of 100 psig on Most Models 
Acceptable for Indoor Use 
Corrosion Proof Valox Housing 
Tamper Resistant Electronic Control Panel Cover
Tube Failure Detection
The FPU2000 Series fixed pumps feed by an analog fixed 60 second timer. The pump can be on for 1 to 60 seconds. All FPU2000 Series have fixed speed outputs and can be adjusted by selecting the pumphead tube size and choosing the desired RPM (revolutions per minute).
The FPUVS2000 and FPUDVS2000 Series variable speed pumps are for continuous pumping relatively pulse free, even while adjusting the percentage of output. The variable speed pump requires the use of brushes on the DC motor. Excellent brush life expectancy (2000 hours). An extra set of brushes included with every pump.
The FPUDVS2000 Series will accept any one of three different types of external input signals; 4 to 20 mA, 0 to 10 Vdc, or frequency. The 4 to 20 mA and 0 to 10 Vdc loops must be powered. Two types of frequency inputs, AC sine waves (magnetic coils type outputs) and digital square waves (Hall Effect signals, contact closures), are acceptable. A jumper plug located on the circuit board is factory pre-set for AC sine wave signals, the jumper must be re-positioned when digital square wave signals are being used. All wiring connections are to be made inside of the junction box located on the side of the FPUDVS2000 Series.
A liquid tight connector is supplied and should be used for the external signal cable. The signal input wires are color coded to the type of signal being used. 
SPECIFICATIONS
Maximum Working Pressure: 100 psig/6.9 bar (most models)
Maximum Fluid Temperature: 54°C (130°F)
Ambient Temperature Range: -10 to 43°C (14 to 110°F)
Enclosure: NEMA 3R (IP24) (acceptable for indoor use)
Pump Tube Material: Norprene
Duty Cycle: Continuous
Maximum Solids: 50% by volume
Maximum Viscosity: 5000 Centipoise
Maximum Suction Lift: Up to 9 m (30') water
Turn Down Ratio: 20:1
Power Requirements: 115 V 60 Hz 80 Watts, 220 V 50 Hz 40 Watts, 230 V 60 Hz 45 Watts
Variable Speed: 115 V 60 Hz 40 Watts, 220 V 50 Hz 40 Watts, 230 V 60 Hz 40 Watts
Dimensions: 155.6 H x 257.2 W x 228.6 mm D (61?8 x 101?8 x 9")
Variable Speed: 159 H x 254 W x 235 mm D (6? x 10 x 9?")
Weight: 3.6 kg (8 lb)
Tube Connection: Compression barb type (3?8" ID x ?" OD)
 

產品型號/產品描述
Peristaltic Pumps
Fixed Timer Control
FPU2001 Max Feed Rate: 6 ml/min (2.3 GPD)
FPU2002 Max Feed Rate: 13 ml/min (4.9 GPD)
FPU2003 Max Feed Rate: 21 ml/min (8 GPD)
FPU2004 Max Feed Rate: 25 ml/min (9.5 GPD)
FPU2005 Max Feed Rate: 28 ml/min (6.8 GPD)
FPU2006 Max Feed Rate: 42 ml/min (16 GPD)
FPU2007 Max Feed Rate: 63 ml/min (24 GPD)
FPU2008 Max Feed Rate: 79 ml/min (30.1 GPD)
FPU2009 Max Feed Rate: 57 ml/min (21.7 GPD)
FPU2010 Max Feed Rate: 138 ml/min (52.5 GPD)
FPU2011 Max Feed Rate: 200 ml/min (76.1 GPD)
FPU2012 Max Feed Rate: 250 ml/min (95.1 GPD)
Variable Speed - Standard Percentage
FPUVS2001 Max Feed Rate: 6 ml/min (2.3 GPD)
FPUVS2002 Max Feed Rate: 13 ml/min (4.9 GPD)
FPUVS2003 Max Feed Rate: 21 ml/min (8 GPD)
FPUVS2004 Max Feed Rate: 25 ml/min (9.5 GPD)
FPUVS2005 Max Feed Rate: 28 ml/min (6.8 GPD)
FPUVS2006 Max Feed Rate: 42 ml/min (16 GPD)
FPUVS2007 Max Feed Rate: 63 ml/min (24 GPD)
FPUVS2008 Max Feed Rate: 79 ml/min (30.1 GPD)
FPUVS2009 Max Feed Rate: 57 ml/min (21.7 GPD)
FPUVS2010 Max Feed Rate: 138 ml/min (52.5 GPD)
FPUVS2011 Max Feed Rate: 200 ml/min (76.1 GPD)
FPUVS2012 Max Feed Rate: 250 ml/min (95.1 GPD)
Variable Speed - Digital Percentage Controllers
FPUDVS2001 Max Feed Rate: 6 ml/min (2.3 GPD)
FPUDVS2002 Max Feed Rate: 13 ml/min (4.9 GPD)
FPUDVS2003 Max Feed Rate: 21 ml/min (8 GPD)
FPUDVS2004 Max Feed Rate: 25 ml/min (9.5 GPD)
FPUDVS2005 Max Feed Rate: 28 ml/min (6.8 GPD)
FPUDVS2006 Max Feed Rate: 42 ml/min (16 GPD)
FPUDVS2007 Max Feed Rate: 63 ml/min (24 GPD)
FPUDVS2008 Max Feed Rate: 79 ml/min (30.1 GPD)
FPUDVS2009 Max Feed Rate: 57 ml/min (21.7 GPD)
FPUDVS2010 Max Feed Rate: 138 ml/min (52.5 GPD)
FPUDVS2011 Max Feed Rate: 200 ml/min (76.1 GPD)
FPUDVS2012 Max Feed Rate: 250 ml/min (95.1 GPD)
Accessories
FPU1000-AB Quantity 2, armature bearings
FPU1000-IF Injection fitting
FPU2000-14PTA 1/4" OD pump tube assembly
FPU2000-38PTA 3/8" OD pump tube assembly
FPU2000-716PTA 7/16" OD pump tube assembly
FPU2000-CW Ceramic weight
FPU2000-PH Pump head
FPU2000-PHB Pump head cover with bearing
FPU2000-RA Roller assemblies for 1/4 and 3/8" tube models
FPU2000-716RA Roller assemblies for the 7/16" tube model
FPU2000-SP Strainer plug
FPU2000-TN Tube nut (3/8")
 

注釋: Comes complete with suction tube strainer, tube weight, suction tubing, discharge tubing and injection fitting with internal back-flow check valve, mounting hardware, and operator’s manual.
FPUVS and FPUDVS come with an additional set of brushes.
 

FPU2005蠕動泵 美國omega 

FPU1605蠕動計量泵 美國omega