您好, 歡迎來到化工儀器網
ASTM D4355測試標準
本頁面標準信息均來源于網絡收集，或由參與標準制定的供應商提供，只作為參考使用，為確保測試結果的準確性、節省您的時間，如需ASTM D4355標準詳細信息或ASTM D4355具體測試方法，歡迎與我們技術人員聯系或給我們留言，我們將為您相關的技術支持。
ASTM D4355標準介紹
曝露在氙燈設備的光、潮濕和熱中的土工布老化的標準測試方法：
該測試方法規定了曝露在氙燈輻射、濕氣和熱量中的土工布拉伸強度退化的測定。
ASTM D4355英文簡介
1. Scope
1.1 This test method covers the determination of the deterioration in tensile strength of geotextiles by exposure to xenon arc radiation, moisture, and heat.
1.2 The light and water exposure apparatus employs a xenon-arc light source.
1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
2. Referenced Documents
The documents listed below are referenced within the subject standard but are not provided as part of the standard.
D123 Terminology Relating to Textiles
D1898 Practice for Sampling of Plastics
D4439 Terminology for Geosynthetics
D5035 Test Method for Breaking Force and Elongation of Textile Fabrics (Strip Method)
E691 Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
G113 Terminology Relating to Natural and Artificial Weathering Tests of Nonmetallic Materials
G141 Guide for Addressing Variability in Exposure Testing of Nonmetallic Materials
G151 Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources
G155 Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials
Q-sun氙燈試驗箱ASTM D4355測試方法
▼ASTM D4355第三方檢測機構
以上標準信息來自互聯網搜索整理，如需了解完整的ASTM D4355的信息或ASTM D4355標準解讀，歡迎詳詢。